Palace White Single Part SuperFlex S2 White Adhesive 20kg
Single Part S2 Superflex adhesive. Suitable for Ply, T&G Floorboards. Mix with Water. C2FTE-S2
PALACE SINGLE PART SUPER-FLEX S2 is a one component White cement-based adhesive, with a high level of built-in polymer fortification which makes this adhesive suitable for fixing all types of ceramic floor tiles, including mosaics, porcelain and vitrified tiles onto some of the most difficult surfaces in internal & external locations where movement or vibration is likely. The product is mixed by the addition of water and can then be applied onto timber panels, plywood, composite boards as well as tongue and groove floorboards, floating plywood floors and also where sub-floor heating is installed. SINGLE PART SUPER-FLEX S2 fast-setting properties allow foot traffic & grouting to proceed just 4 hours after fixing. Tested in compliance with the performance requirements of EN 12004 C2FTE-S2
- Polymer fortified powder, mixes only with water
- Allows fixing to WBP plywood & heated floors
- Will tolerate slight movement & vibration
- Suitable for Tongue & Groove floorboards
- Can be used on stabilised floating floors
- Mixes easily to a smooth, easy to apply paste
